PAC
HCFA PAC has many series and models, supports the IEC61131-3 programming standard, and fully meets the automation and intelligence needs of factories, production lines and process control.
Q1
Product Series : Standard bus type motion controller
Module Type : CPU units
Processor : A7*2, 1.2GHz, 1G DDR+2G EMMCa
Support Protocols : EtherCAT, CANOpen, Modbus TCP/PTU, OPC/UA etc.
Product Features
High Speed & High Configuration
Built-in 2-core processor + FPGA architecture
EMMC+SD+USB3.0+DDR3 accelerator
Built-in 32 high-speed IO (16IN/16OUT)
Communication Compatibility
Supports standard EtherCAT/CANOpen/Modbus TCP/Modbus RTU protocols
Complete communication interface
Ethernet Gps*2/EtherCAT interface/CAN and 3-way serial port built-in (RS485/RS232) WiFi and other options
Support Modbus Master-Slave mode
High Ease of Use
Standardized programming development: IEC61131-3 specification in 6 programming languages, using CODESYS platform
Flexible system configuration, up to 65535 slave stations
USB driver-free
12mm ultra-narrow direct pull module & push-in terminal
Motion Control
PLC OPEN-based standard motion control: linear/arc/spiral interpolation/electronic cam & flying shear & chasing shear/CNCG code control/Robot control
Ultra-short synchronization cycle: command execution can reach 1ns; 1ms with 8 axes, 2ms with 16 axes
Q0
Product Series : Basic bus type motion controller
Module Type : CPU units
Processor : A7*2, 650MHz, 1G DDR+2G EMMC
Support Protocols : EtherCAT, CANOpen, Modbus TCP/PTU etc.
Product Features
High Speed & High Configuration
Built-in 2-core processor + FPGA architecture
EMMC+SD+USB3.0+DDR3 accelerator
Communication Compatibility
Supports standard EtherCAT/CANOpen/Modbus TCP/Modbus RTU protocols
Complete communication interface
Ethernet Gps*2/EtherCAT interface/CAN and 3-way serial port built-in (RS485/RS232) WiFi and other options
Support Modbus Master-Slave mode
High Ease of Use
Standardized programming development: IEC61131-3 specification in 6 programming languages, using CODESYS platform
Flexible system configuration, up to 65535 slave stations
USB driver-free
12mm ultra-narrow direct pull module & push-in terminal
Motion Control
PLC OPEN-based standard motion control: linear/arc/spiral interpolation/electronic cam & flying shear & chasing shear/CNCG code control/Robot control
Ultra-short synchronization cycle: command execution can reach 1ns; 1ms with 8 axes, 2ms with 16 axes
Q Plus Series
Product Series : Intelligent Mechanical Controller
Module Type : CPU unit/CPU unit+power module
Processor : ARM, Celeron, Intel I5, Intel I7
Supported Protocols : EtherCAT, Modbus, OPC UA, EtherNet/IP, CANopen
Power Module : HCQX-PD11-D4 (model)
Product Features
High Performance Control
Intel high-performance quad core processor
Supports dual EtherCAT master stations, capable of supporting 128+128 axes in 1ms
Minimum 125us scanning cycle
High Integration
Integrated rich hardware interfaces: The controller provides multiple communication interface options, including Ethernet, serial port, CAN bus, etc. The rich communication interface enables the Hechuan HCQP series controller to exchange and communicate data quickly and reliably with other devices and systems.
3-channel Gigabit Ethernet, no gateway module required, achieving independent IP.
The controller supports multiple bus protocols, including Modbus, CANopen, EtherCAT, OPC UA, EtherNet/IP. Users can easily interconnect with other devices, sensors, and actuators.
Easy Development
New secondary development IDE – HCP Works3
Supports IEC 61131-3 standard programming language and follows PLCopen2.0 specification
Built in servo parameter debugging interface, one click addition of slave devices, resource usage table and other functions, enhancing user convenience
Clear topology structure, graphical device configuration interface, local configuration interface
Strong Operation Control
Support linear/arc/spiral interpolation/electronic cam&flying shear&chasing shear/CNC G code control/Robot control